123 hp com

123 hp envy 4510 airprint setup

Requirements for AirPrint

  • An Apple device with v4.2 or other further versions.
  • A wireless HP printer that supports AirPrint.
  • A secured Wireless network and applications that enable AirPrint.

How to print using AirPrint

  • Open the application containing the document to be printed.
  • Click on the Action tab to open the Action menu.

    123hp com airprint setup

  • Click on Print and in the Printer Options menu displayed select HP Envy 4510.
  • If modifications are required on your print, change accordingly on the options displayed.
  • After all the required changes have been made, proceed to Print.

Troubleshoot for AirPrint

    If the print job fails, try the following pointers to resolve the issue.

  • Bring the router close to the printer and ensure that the printer gets continuous signal.
  • Restart the printer and the router after making sure that both your devices are connected to the same Wireless Network.
  • Print the Network Configuration page and check if the connection type in the report says Wireless.
  • Check if Wi-Fi is turned on in your Apple device.
  • Ensure that the firmware of your printer is updated to the latest version. If not log in to our customer support webpage and download the update.
  • Confirm that AirPrint is enabled on your printer. If not obtained, obtain the IP address of the printer and open your browser.
  • After copying the IP address on the tool bar, navigate to Network Settings, enable AirPrint and select Apply.
  • Try printing from another device or computer.
  • Reset the printer by disconnecting the power cord from the printer when the printer is turned on and then plug it back into power after a few seconds.

TOP RELATED SEARCHES